11el 222MHz LFA Yagi H Frame

11el_222MHz_LFA__500507aeadb60.jpg
Manufacturer InnovAntennas

An H frame for 4 x 11el 222MHz LFA Yagis

Preloader

A 1.85m x 1.66m H frame for use with the 11el 222MHz LFA Yagi

Should you be looking to work via the moon (EME) or just work some serious DX via MS (Meteor Scatter) or just pack a punch! The InnovAntennas H shaped stacking frame allows you to do just that. Combining the power of 4 antennas in one setup carries with it a lot of benefits including the performance of a much bigger single Yagi within a relatively small package.

Our H frame is designed to allow most common Elevation rotator fitment (such as Yaesu G5500 of SPID) although we can custom-make any H frame to suit your particular rotor requirements. All our H frames use square box section tubing which ensures easy alignment and setup during install and also ensures over time your antennas will not twist and point in different directions.

All supplied hardware is Marine grade stainless steel and the H frame is supplied with 4 specifically designed boom to mast brackets to suit your antennas boom.

Specification highlights

  1. Marine grade stainless steel fittings*
  2. 4 x Specifically designed boom to mast brackets
  3. Mill finished for highest levels of accuracy
  4. Simple and easy construction
  5. Stack Frame size 1.85m x 1.66m

Notes on the designs of our H frames

The standard supplied sizes for our H frames will ensure the lowest noise and most quiet patterns with absolute minimum side lobes. These stacking positions do alter from those specified on the specific antenna page on our site. The sizes presented on the individual antenna pages reflect DL6WU calculated spacing (with minor adjustments) which represented industry standards and allows for easy comparison. However, our frames are arranged to allow our antennas to perform in the way they were designed. If you require this or any other wider/larger spacing, we will be happy to discuss your requirement with you and provide a solution that suits you.

Special consideration has been made with our 222MHz LFA Yagis and associated H frames. The mechanical structure of any part of the antenna (or supporting mast) is significant (in respect of frequency) on this band so where possible, avoidance of metallic objects crossing the elements is an important consideration, especially within short antennas. Unlike other companies we have paid a great deal of attention to the design of our UHF products and this will be reflected in the superior performance our customers will see.

Should any customer require another configuration, we will provide the H frame to suit.

alt

 

Manufactured the right way, not the cheapest way!

*Where possible marine grade stainless steel components are used.


Copyright © 2024 Innovantennas. All Rights Reserved