7 element 70MHz LFA-WOS Yagi
Prices 20% less for customers outside of EU
A High Gain 70MHz LFA Yagi optimised for urban environments and reduction of inband noise, including other stations!
The antenna is a scaled and re-optimised version of the 50MHz LFA WOS originally designed for G3WOS
The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals. If you suffer with noise or are in a city location, this is the antenna for you. This 7 element 70Mhz LFA provides stunning performance across the whole 4m band (69.900 - 70.500MHz). Hard to beat with a direct 50 Ohm feed-point and no matching losses!!
This is an excellent stacker requiring just 4.4m spacing. See details below.
One of out customers in Canada sent this comparison video switching between his conventionally optimised 7el 50MHz Yagi and our 7el WOS which were at the same height but separate towers.
Gain:12.98dBi @ 70.200MHz
Gain at 10m above ground: 18.76dBi
F/B: 27.48dB @ 70.200MHz
Peak Gain: 13.02dBi
Peak F/B: 27.98dB
Power Rating: 5kw
SWR: Below 1.1:1 from 69.900MHz to 70.500MHz
Boom Length: 6.796m
Stacking Distance: 4.4m Vertically, 4.9m horizontally
2 Stacked Gain: 15.65dBi
2 Stacked Gain 15m up above average ground: 21.12dBi
2 Stacked F/B: 30.41dB
This antenna is made with single piece 1/2 inch 18swg T6 aluminium tube tapering to 3/8 inch tube at the element tips. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 1.5 inch square 16SWG aluminium Kevlar guys required and supplied with stainless steel turnbuckles for adjustment.
- Marine grade Stainless Steel Fittings*
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy
1 x 7el LFA at 15m above ground
2 x 7el stacked at 4.9m apart 15m above average ground
A 7el 70MHz LFA installed above a 7el 50MHz LFA at PA7F
Manufactured the right way, not the cheapest way!
Where possible marine grade stainless steel fittings are used.