The XR3C MkII - A 6 element HF tri-bander Super-compact Yagi covering 20m/15m/10m bands with a single feed point
The XR3C MkII has a super-small footprint even though it is a full-sized Yagi covering 20/15/10 ham bands. The longest element is 8.9m with reduced turning radius too! The XR3 MkII is set to become a market-leader very quickly. Why not get ahead of the pack with this one and get your order in early!
The full sized and super-compact XR3C @ GM0OPX
NEW for 2019! The XR3 MkII - The InnovAntennas XR3 MkII - An 6 element multi-band 20m, 15m, 10m Super-compact Yagi with a single feed point.
Capacity Loading high efficiency loading
The XR3C uses capacity hats to reduce the width of the 20m elements which is the most efficient method of loading Additionally, width has not been reduced more than 23% of the original radiator length, after this point radiating efficiency drops drastically. The XR3C radiates more of your power!
Unique in the Market
The XR3C MkII has been given the 6m band in addition to the traditional 3 HF bands of 20/15/10 to match today's HF rigs and give excellent performance on all bands. with a boom of just 3.1m and weighing under 20 Kilos, this antenna has created its own place in the 'full size' HF Beam market.
Unlimited Power Handling
The XR3C MkII has no matching devices, no traps, no coils, no hairpins so nothing to lose valueable power and thus, nothing to over-heat through these inefficient devices. This means the only power limitation you have is how much power your coax cable can handle.
The Ideal partner for SDR Radios
The XR3C MkII is an ideal partner for today's top SDR radios. There is no limitation in how many bands you can monitor or use at once. This means with products such as the Flex 6700, all 6 bands can be monitored at the same time WITHOUT COMPROMISE.
The XR3C MKII has been in development for the last 12 months improving bandwidth and gain to ensure more of each band than ever before can be used without the requirement of an ATU.
Multi-band, Performance-Busting Design
The more bands there are added to a multi-band Yagi, the more interlaced elements there are and in turn, performance per band drops with each no band added. The Unique design of the XR3C MkII means no more than 3 band are interlaced on any part of the boom.
We have modified the construction of the XR3C MkII to provide a more rigid look with faster taper to ensure fatigue due to vortex shedding (constant wind flow causing vibration) are not an issue. 20m element start at 35mm diameter and boom is 50mm diameter.
Excellent All-Weather handling and reliability
With no moving parts and being modelled for wide bandwidth per band, the XR3C MkII is very forgiving in all weathers allowing you to enjoy your hobby whatever the location or time of year.
Icom North America and Kenwood UK changed their HF antennas to 'XR's' to ensure reliability and remove the need for maintenance. If you don't want to be climbing the tower each year to fix stuff, the XR3C MkII is for you.
The Right Materials for the Job
The XR4 MkII standing on it's own in terms of quality. built using the latest CNC technology, all components are at the top of their field too. Our insulators are UV protected and handle -170 to +240 degrees C, our hardware is Marine Grade Stainless Steel and our aluminium aerospace grade T6 6066/6082.
Turning Radius: 15.2' / 4.62m
Boom Length: 10'3'' / 3.1m
Projected area: 11.56 SqFt /1.05SqMtr
Average Gain per band @ 20m above average ground: 11.24dBi
Power Rating: 10kw+
Boom Length: 3.1 Metres
Wind Loading: 1.2 Square Metres
Wind Survival: up to 175KPH / 115MPH
Other options available if higher wind loading/survival is required.
Stacking Distance: 7 - 12m ( 11m recommended)
The boom is made from 50mm diameter square tube with a wall thickness of 2mm and thus is super-rigid. The largest diameter elements are the 20m elements which are 35mm diameter in the centre (with 2mm wall) tapering quickly to 13mm. Marine grade stainless steel is used throughout our antennas, no guying or boom truss is needed with this antenna.
Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable!
Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here