View Full-Size Image
12 element 222MHz LFA Yagi
£239.95 (including 20 % tax)
|Ask a question about this product|
Prices 20% less for customers outside of EU
A 12 element Very Low Noise Yagi for serious DX, weak signal and EME applications upon 222MHz
The LFA is especially effective for EME where very low noise antennas are required and many hours of development have been spent ensuring the highest levels of performance have been achieved in an antenna that is not affected by wet weather conditions. As a single, double and 4 stack system, the LFA Yagi is the one to have.
Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures our antennas work as well as our software model predicts.
If you are looking for the best of the best from both a performance and mechanical construction perspective then look no further, you have come to the right place!
Gain: 15.31dBi @ 222.050MHz
Gain (1 antenna 10m above ground): 21.2dBi
Gain (2 stacked 10m above ground): 23.58dBi
F/B: 40.28dB @ 144.050MHz
Peak Gain: 15.56dBi
Peak F/B: 41.21dB
Power Rating: 4kw
SWR: Below 1.1.1 from 221.000MHz to 224.00MHz
Boom Length: 4.69m
Stacking Distance Vertically: 1.55 -2.25m (best trade-off 1.9m)
Stacking Distance Horizontally: 1.6 - 2.3m (best trade-off 2.1m)
2 Stacked Vertically @ 1.9m Gain: 17.96dBi
2 Stacked Vertically @1.9m F/B: 42.98dB
2 Stacked Horizontally @ 2.1m Gain: 18.05dBi
2 Stacked Horizontally @ 2.1m F/B: 45.07dB
4 Antennas 1.9m V x 2.1m H Gain: 20.74dBi
Sky Temperature: 211.6 Kelvin
G/T Figure: -2.52dB
This antenna has all parasitic elements made from 1/4 inch aluminum rod. The LFA loop is constructed from 4 pieces of aluminum tube. The sections in-line with the parasitic elements are 1/2 inch while the end sections of the loop are 3/8 inch allowing the user to adjust the loop for best SWR. All elements are fully insulated from the boom held in place by high quality UV resistant, RF neutral insulators which in-turn are held to the boom via Marine grade stainless steel fixings and fittings.
The boom is 1.25 inch square (31.75mm)
If you want an antenna to last and perform in all weathers without SWR or bandwidth shifting, this is it.
Single antenna 10m above average ground
2 x 12el 222MHz LFAs 10m up and 1.9m apart
The 222MHz 12el LFA element layout
Manufactured the right way, not the cheapest way!
*Where possible marine grade stainless steel components are used.