5 element 50MHz LFA-HG Yagi (3.9m)

Prices 20% less for customers outside of EU

A 5 element low-noise LFA Yagi

The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals. This compact 5 element 50Mhz LFA provides stunning performance across the important section of the 6m band (50.00 - 50.300MHz). Hard to beat with a direct 50 Ohm feed-point and no matching losses and suppression of unwanted noise !!

Note: The HG LFA has been optimised to provide class-leading gain for its given boom length. However, this could be at the detriment of antenna stability (SWR) during wet and extreme weather

Performance

10.67dBi @ 50.150MHz

27.10dB @ 50.150MHz

Peak Gain: 10.69dBi

Gain at 10m above Ground: 16.15dBi

Peak F/B: 28.33dB

Power Rating: 5kw

SWR: Below 1.4:1 from 50.00MHz to 50.300MHz

Stacking Distance: 4.5-5.76m ( 5.49m recommended)

2 Stacked Gain @ 5.49m spacing: 13.71dBi

2 Stacked F/B: 32.09dB

2 Stacked Gain @ 5.49m Spacing 10m above ground: 18.87dBi

Boom Length: 3.9m

Weight: 5.92Kg / 13LB

Turning Radius: 2.959m / 9.8ft

Wind Loading: 0.6 Square Metres / 1.74 Square feet

Wind Survival: 256KPH / 159MPH

Other options available if higher wind loading/survival is required.

Specification

This antenna is made with single piece (center join at insulator) 1/2 inch (12.7mm) elements with 3/8 inch (9.525mm) diameter loop end sections. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts.  Boom is 1.25 inch square 16SWG aluminum.

Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts.

Note: much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up or our antennas have least effect on performance and pattern degradation. More information can be found here

• Marine grade Stainless Steel Fittings
• Original Stauff Insulation clamps
• Mill finished boom and elements for highest levels of accuracy

Azimuth Plot

Elevation Plot

Single 5 element LFA up 10m above ground

2 x 5 el LFA Yagi 5.49m apart with the bottom antenna 10m above ground

2 x 5 el LFA Yagi 4.9m apart with the bottom antenna 10m above ground

SWR

The compact 5el LFA at G4AMV

Manufactured the right way, not the cheapest way!